There are many reasons why you would need to know how to open a locked door.
Imagine this scenario: you are rushing to leave the house, run out the door, and shut it behind you. It locks automatically, and then almost immediately, a feeling of dread washes over you. The door is locked and your keys are inside.
An interesting fact, did you know residents of Chicago alone average around 200 lockouts a day. Mostly due to rushing to work, rushing home, and not owning duplicate keys.
Before you call a locksmith, which could cost $100s of dollars, there are some things that you can do if you are trying to get in.
It doesn’t matter what type of door it is, if you want to know how to open a locked door, try the methods, below:
How to open a Locked Door with a Credit Card
If you are looking for information on how to open a locked door with a spring lock, a credit card is the easiest way.
Take a credit card and force it between the door frame and the lock. Keep the card adjacent to the frame, and then push it back. This should force the lock back into the door, allowing you to open it.
Unlock with a Bump Key
If you don’t have a spring lock, or you are looking for another method, a bump key can work. What is a bump key?
It is a key that won’t necessarily turn in the lock, but you can use it to open the door. You might find bump keys online, but it’s more likely that you have to make one.
Once you have the bump key made, insert it into the door, but don’t push it past the last pin.
With the key in place, hit it with a large rubber mallet. The force pushes the final pin and opens the lock.
Pick the Lock
Making a bump key is a bit complicated, so picking the lock might be easier.
Use a tension wrench and a paper clip, bobby pin, or another metal piece that fits into the lock.
This is called your pick. Insert the tension wrench into the lock and apply pressure. Insert the pick above the wrench.
Move the pick to find where each pin is, and then push the pin up.
The door opens when all pins are in the up position.
Remove the Hinges
You might also consider removing the hinges of the door. Usually, you can force the pin from the hinges by inserting a flat head screwdriver between the pin and the hinge.
Once all of the hinges are free, you can remove the entire door.
Drill the Lock
Finally, if nothing else works, consider drilling the lock.
To do this, use a good quality drill with drill bits. Drill directly into the side of the lock where the pins are. Remove the drill, and use a flat head screwdriver to turn the lock.
If it doesn’t work, use a larger drill bit and make the hole bigger. Eventually, the lock will open.
These are all methods that a locksmith uses. So, if you do them yourself, you can save time and money, while still getting the locked door open.